07/10/2024
  • Italiano
  • English
  • Français
  • Deutsch
  • Español
  • Pусский
Последняя дата обновления: 07/10/2024

RENAULT-BERLIET

In the check valves flow is free in one direction and blocked in the reverse one.

RENAULT-SAVIEM

SCANIA

Pilot check valves are used to block the cylinder in both directions. Flow is free in one direction and blocked in the reverse direction until pilot pressure is applied.

SPICER

These valves are used to block the cylinder in one direction. The flow is free in one direction and blocked in the reverse direction until pilot pressure in applied.

TATA

These valves are used to prevent the actuator uncontrolled descent in case when hose is broken. In case of sudden flow increase (reaction flow), the valve *is operated blocking the flow.

TATRA

These valves are used to control actuator’s movement and block in one direction in order to enable the following functions:- under control descent of a load: load’s weight doesn’t carry it away as the valve prevents any cavitations of the actuator - limited maximum pressure in case of shocks created by loads, overloads or sudden manoeuvrings (load control with opened centre distributor).

TOYOTA

These valves are used to control actuator's movement and block in both directions in order to enable the following functions:- load under control descent: load's weight doesn't carry it away, as the valve prevents any cavitations of the actuator - limited maximum pressure in case of shocks created by loads, overloads or sudden manoeuvrings (load control with opened centre distributor).

TURNER

The modular pilot check valve are designed to be mounted under any solenoid valve provided that it complies with the CETOP standards.

VOLKSWAGEN

The relief valve is used to limit pressure in a hydraulic circuit at a certain setting value. When this pressure setting is reached, the valves opens allowing pressure relief in order not to exceed this setting.

VOLVO

ZF

Made up by 2 relief valves with crossed outlet, this valves are used to block pressure to a certain setting in both ports of an actuator/hydraulic motor. They represent the ideal solution both to provide protection against sudden pressure shock and to adjust at different pressure values the 2 ports of any hydraulic circuit.

АДАПТЕРЫ ZF

Sequence valve is used to feed 2 cylinders in sequence: it provides flow to the secondary circuit when a primary circuit function has been completed reaching the pressure setting. The valve allows free return flow. It's ideal for circuits with low pressure in the secondary actuator, as the pressures add to *one another.

ZF-US

SERIES WL

These valves are used to block the cylinder in one direction. The flow is free in one direction and blocked in the reverse direction until pilot pressure is applied. Thanks to their high pilot ratio and to a delay locking device, these valves are suitable to avoid vibrations in circuits with heavy loads.

СЕРИЯ TXF

СЕРИЯ MIDI

This valve is used to select higher pressure value between two pressure lines, excluding the other one.

СЕРИЯ QUASAR

СЕРИЯ ICEBERG

МУЛЬТИПЛИКАТОРЫ И ОПОРЫ

This valve is used to adjust flow speed of actuators in one direction and allow free flow in the reverse one. As pressure compensation is not provided, flow adjustment depends on pressure and oil viscosity.

ВСПОМОГАТЕЛЬНЫЕ ПРИНАДЛЕЖНОСТИ

The relief valve is used to limit pressure in a hydraulic circuit at a certain setting value. When this pressure setting is reached, the valves opens allowing pressure relief in order not to exceed this value.

O.M.F.B. S.p.A. Hydraulic Components
Via Cave, 7/9 - 25050 Provaglio d'Iseo (BS) Italy -
Tel. (+39) 030.98.30.611
P.IVA: IT06226910963 -
Cap. Sociale € 20.000.000 i.v.
C.F. 06226910963 -
N.Isc.Reg.Imp. di Brescia 06226910963 -
REA 529468

The brands of our group

Данный сайт использует куки, чтобы гарантировать, что вы получите лучший опыт на нашем сайте. Больше информации

принимать